- Home
-
Resources
- Center for Hydrogen Safety
- Hydrogen Fuel Cell Codes and Standards
- Paper & References
- Web-based Toolkits
- Workforce Development

- Contact
- About H2Tools
The trailer overturned and due to the impact released the whole trailer content to the atmosphere. After which the truck and the trailer could be put back on wheels. (The driver could not deliver…
The pressurisation line on the nozzle skirt of a liquid hydrogen tank ruptured at welded section. Two tests were underway at the same time; one was a pressure test up to 1850 psi (ca. 128 bar) in…
During sampling tests on a facility LH2 dock transfer system, the system was pressurized to 15 psig when an expansion joint ruptured. Technicians proceeded with the pressure cycle with the main…
A full liquid hydrogen tanker left the home terminal with a internal pressure of 6 psig. Throughout the trip, drivers experienced nothing other than normal conditions. 12 hours later, at a scale,…
This event summarises 3 very similar cases of leaks at dispenser hoses during refuelling, occurred at the same hydrogen refuelling station in the period January - April 2017. The leaks triggered…
A leak occurred when transferring hydrogen from a trailer to the customer storage. The driver had just completed the pre-fill procedures and was starting to apply pressure to the fill hose, when…
"A leak occurred when transferring gaseous hydrogen from a tube trailer to the well of a hydrogen underground storage test facility. The leak was located at a threaded fitting which was part…
When a CGH2 tube trailer was backing into the terminal stall and getting ready to unhook the tractor a leak was detected on one of the cylinders. It was reported immediately to owner of the…
A driver found a small audible leak coming from the rear of the trailer compartment, while conducting in-trip visual walk-around inspection at a roadside. The driver set up perimeter around…
A leak developed on a CGH2 tube trailer on the pigtail of one of the tube. The pigtail was cracked, possibly due to vibration. This trailer was tested the day before this incident and was found to…
A liquid hydrogen tanker had completed the off-loading at a customer’ site (metal manufacturer). The drivers were preparing to disconnect from the customer’ tank, when they noticed a small leak at…
The driver of a liquid hydrogen tanker noticed a small plume at the rear while traveling on a highway. He pulled over and found that the manual vent valve had opened due to vibration. The valve…
A LH2 trailer/truck were travelling on a highway when they noticed vapour coming from the trailer cabinet. They exited the highway, parked and opened the trailer cabinet. They found that a nut had…
A liquid hydrogen tanker was parked at a parking place. The vacuum on the tanker vessel deteriorated causing inner container pressure increase. When the inner container pressure reached the…
While travelling on a highway, the driver of a liquid hydrogen tanker noticed vapour coming from under the tank control cabinet. The driver stopped at rest stop and notified the home terminal,…
A liquid hydrogen tanker was travelling to a customer when the driver noticed that hydrogen release was occurring at the trailer vent stack. The driver stopped the vehicle in a safe location and…
A liquid hydrogen tanker was travelling on a higway, when the vacuum guranteeing the thermal insulation of the tank started to degrade. The increased heat transfer caused a pressure build-up and…
The driver of a liquid hydrogen tanker noticed a small plume at the rear of the track. He pulled off at the next exit and found that the manual vent valve was open due to road vibration. The valve…
A tanker was returning to the base after delivery of liquid hydrogen at a space centre. The driver tanker noticed a small plume at the rear of the track. He pulled off at the next exit and found…
A liquid hydrogen tanker was driving on a highway, when the driver noticed a vapour plume in his mirror. Driver stopped and found a small amount of vapour coming from the vapour recovery line,…
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.