Skip to main content

Small LH2 leak during transfer (64)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Small LH2 leak during transfer

A liquid hydrogen tanker had completed the off-loading at a customer’ site (metal manufacturer). The drivers were preparing to disconnect from the customer’ tank, when they noticed a small leak at the "T" connection at liquid line to liquid level gauge. They stopped the leak by forcing a small wooden stick into the opening. The drivers called the onsite company serviceman, who failed to repair leak. 2. 50 hours later the company corporate office was called for assistance. The team arrived 4. 50 hour later. After assessing situation, the team instructed the serviceman on how to repair line. The team explained the procedure to fire fighters and the police officials. The repair in the night to the following day.

Event Date
July 12, 1990
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments

INITIAL CAUSE was a leak on the liquid hydrogen line. The ROOT CAUSE was probably the same, related to material failure. However, the company service at the customer site had not been able to repair the leak, what speak for a need to improve procedures training.

Facility Information
Application
LH2 tanker
Specific Application Supply Chain Stage
Components Involved

pipe connection

Storage/Process Medium
Storage/Process Quantity
2679
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Environmental Damage
0
Currency
Property Loss (onsite)

100

Property Loss (offsite)

0

Lessons Learned

The fact that company service at the customer site had not been able to repair the leak, probably indicates that procedures training could be improved.

Event Nature
Emergency Action

The drivers stopped the leak by forcing a small wooden stick into the opening. Unclear if this was successful to reduce/stop the leak. After that the on-site company serviceman had not been able to repair, the company team arrived from the head quarter succeeded, approximately 9 hours later.

Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
References
References

Event incident I-1990080088 of the PHMSA database (Pipeline and Hazardous Materials Safety Administration, 1996), https://portal. phmsa. dot. gov/analytics/saw. dll?Portalpages (accessed September 2024)