Skip to main content

HIAD Quality Indicator: 3


"A leak occurred when transferring gaseous hydrogen from a tube trailer to the well of a hydrogen underground storage test facility. The leak was located at a threaded fitting which was part…

When a CGH2 tube trailer was backing into the terminal stall and getting ready to unhook the tractor a leak was detected on one of the cylinders. It was reported immediately to owner of the…

A liquid hydrogen tanker had completed the off-loading at a customer’ site (metal manufacturer). The drivers were preparing to disconnect from the customer’ tank, when they noticed a small leak at…

The driver of a liquid hydrogen tanker noticed a small plume at the rear while traveling on a highway. He pulled over and found that the manual vent valve had opened due to vibration. The valve…

While travelling on a highway, the driver of a liquid hydrogen tanker noticed vapour coming from under the tank control cabinet. The driver stopped at rest stop and notified the home terminal,…

A liquid hydrogen tanker was travelling to a customer when the driver noticed that hydrogen release was occurring at the trailer vent stack. The driver stopped the vehicle in a safe location and…

The driver of a liquid hydrogen tanker noticed a small plume at the rear of the track. He pulled off at the next exit and found that the manual vent valve was open due to road vibration. The valve…

A tanker was returning to the base after delivery of liquid hydrogen at a space centre. The driver tanker noticed a small plume at the rear of the track. He pulled off at the next exit and found…

An empty 100-m³ reservoir of sulphuric acid (H2SO4) exploded at 9:15 am at a chemical site. Installed directly above its retention basin at a height of several metres, this reservoir was projected…
To repair a corroded flange on a 4500 litre sulphuric acid bowser outlet pipe, an angle grinder was being used to prepare the surface for welding. Within a few seconds of starting work there was a…
A university lab was investigating the production of hydrogen and methane from biomass made of wooden chips or sawdust. The experimental furnace was a concrete cylindrical furnace of the diameter of…
The leak occurred at the ammonia reactor after a technical shutdown of 4 days. When the production was resumed and the syngas compressor restarted 14 hours later, a jet-fire occurred. The Internal…
The event occurred while re-starting the ammonia production unit after a technical stop, a synthesis gas (50% hydrogen, 17% ammonia, methane and nitrogen) leak ignited on a flange located just after…
Two workers were performing maintenance or repair work on a brine surge tank, which potentially contained hydrogen gas in a vapour space in its upper portion. The job consisted in removing and…

During loading of a LH2 storage tank, the vent valve on the tank was opened and then ignition occurred near the instant that the valve was fully open. A light pressure wave was produced. The cloud…

During transfer operations of a liquid hydrogen from a tanker, a release of hydrogen occurred, which resulted in the detection of hydrogen in an adjacent building. The normal procedure could not…

An liquid hydrogen tanker was travelling back to the base terminal after having delivered at a customer site. Almost arrived to the end of the journey, the tanker started to vent. The drivers…