Skip to main content

Syngas explosion at a university laboratory (646)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Syngas explosion at a university laboratory

A university lab was investigating the production of hydrogen and methane from biomass made of wooden chips or sawdust. The experimental furnace was a concrete cylindrical furnace of the diameter of 4 m and the height of 5 m. A fire jet occurred together with the explosion, and sparks fell on the professor in charge and students nearby. Nine persons were slightly injured. According to the fire station and the police, gas ignition was attempted at the gas outlet of the experimental apparatus, to check the effective generation of the gas. However, the gas did not ignite but exploded. (translation from Japanese by means of Google Translate)
Event Date
April 19, 2002
Record Quality Indicator
Region / Country
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
The INITIATING CAUSE was a hazardous action of the research team, which ignited the gaseous products of the biomass gasification process to ascertain the successful generation of synthesis gas (syngas). The ROOT CAUSE could be attributed to the failure of performing a proper risk assessment and of providing the safety measures required to guarantee minimal level of safety, by the manager in charge.
Facility Information
Application Type
Application
Biology laboratory
Specific Application Supply Chain Stage
Storage/Process Medium
Location Type
Operational Condition
Pre-event Summary
The experimental device was being tested.
Consequences
Number of Injured Persons
9
Number of Fatalities
0
Post-event Summary

Nine persons were burned in face and hands and feet, and carried to the hospital by ambulances. They were only slightly injured.

Lessons Learned
There are various safe methods to ascertain the composition of flammable gases, which avoid the need to ignite the whole flow. These methods range from using gas detectors and analysers, up to sampling the gases and testing their energy content under controlled conditions.
Event Nature
Release Type
Release Substance
H2, CH4
Hydrogen Release Concentration (%)
0.00
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

Journal of Japan Society for Safety Engineering,Vol. 42(2),p. 117(2003)In Japanese, available at: https://www. jstage. jst. go. jp/article/safety/42/2/42_117/_pdf/-char/en

Journal of Japan Society for Safety Engineering,Vol. 42(2),p. 117(2003)Google translate