- Home
-
Resources
- Center for Hydrogen Safety
- Hydrogen Fuel Cell Codes and Standards
- Paper & References
- Web-based Toolkits
- Workforce Development

- Contact
- About H2Tools
A gas manufacturing plant, one pallet consisting of nine (9) cylinders fell to the ground. The discharge valve of one cylinder (261 cubic feet of hydrogen) was damaged and the entire hydrogen…
This event occurred at the hydrogen 70 MPa dispenser of a refuelling station during the testing phase. Just after the start of the refuelling test, at a pressure of approximately 13 MPa, the…
A Bourdon tube ruptured in pressure gauge after 528 hours of operation in LH2. The alarm sounded, the system was isolated and then vented. [Ordin, NASA (1974)]
A small hydrogen cylinder was beeing filled at a facility for high-pressure testing. The cylinder had a nominal working pressure of 2000 psi (approximately 140 bar) and the filling a target…
The driver of a hydrogen tube trailer stopped for a rest break and heard an audible leak from the composite tube mounted on the trailer. Local Fire department, medial emergency services and the…
A trailer was transporting 35 tubes of compressed hydrogen (7 m3), when five of them fell, breaking the valves and releasing gas, which ignited on three of them. The caps designed to prevent the…
An explosion occurred at a the compressed gas storage facility of a research laboratory, during filling hydrogen cylinders from a hydrogen tube trailer. Workers used a manifold containing residual…
A CGH2 trailer lost control and left the road travelling for approximately 65 feet before rolling approximately one quarter times. After which it impacted a fence and a utility pole and came to…
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.