Skip to main content

HIAD Event Initiating System: Hydrogen System Initiating Event


A gas release occurred in the building containing the compressors for the recirculation of process gas of a plant producing fertilisers. The process gas was a mixture of hydrogen and nitrogen. It…
An explosion occurred in the glass components of a reactor at a pharmaceutical plant during a batch process. At the time of the accident, the reactor was being hydrogenated. As a result of the…
A leaking hydrogen line exploded at an oil refinery.
A hydrogen leak followed by an explosion occurred at an elbow of a pipeline cooling system and the separator of the distillation unit. The explosion destroyed the unit and injured two workers.
The event occurred at a hydrogen tank (another source reports a 'conduit in an enclosed space') of a hydrogen generation unit of a refinery. The explosion caused a flare and a displacement of air…
The incident occurred in a facility chrome-plating metals. At the time of the event, a metal roller was being chrome-plated. A short circuit occurred due to a defective contacting (contact rails) on…

Explosion as a result of detonation of gases inside container in turbine section causing 2 casualties .

Explosion in generator area, thought to be hydrogen leak as a result of radial lead seal failure. Extensive plant damage.

After cooldown of a LH2 system, the operator noticed cold gas issuing from a small hole in a flexible section of the vent line. Subsequent examination revealed that a deflagration had taken place…

During general repair and equipment replacement on a liquid oxygen-liquid hydrogen Saturn test facility, a section of the 24-inch GH2 vent line ruptured. An explosion occurred causing extensive…

During welding of a pipe to an existing header vent system, hydrogen gas was ignited. The adjacent vessels and lines were inerted with helium and a hydrogen detection check did not indi­cate…

A release of a mixture of hydrogen, nitrogen and ammonia ignited and exploded in the ammonia synthesis unit. The release was due to a cracked pipe and occurred at the level a flange situated at the…
The event took place in the on one out of the seven reactors for ammonia synthesis. The day of the accident, preparation works for the decennial pneumatic test (previous pneumatic test was carried…
The event occurred at the hydrogen production unit of the ammonia production plant. An air-hydrogen mixture formed in the building hosting a water pump which fed water to a vessel that contained…
The event occurred during welding works which ignited accidentally released hydrogen. The plant had been partially shut down for repairing works to a pipe affected by internal cracks. The repairing…
An explosion and fire occurred in a mud logging unit during the final phase of rigging it up. Gas analysers had been calibrated and the flame ionization detection (FID) and total hydrocarbon analyser…

[Note of HIAD event validator: The event description relates to a real accident, the details of which however are not publicly available. The descriptors are based on the analysis provided by the…

Explosion in an electrolyser producing chlorineThe explosion occurred after the opening of an auxiliary circuit-breaker. The opening of the auxiliary circuit breaker trigger the shut down of the…
An explosion occurred in the teat treatment workshop of this site. The explosion was centred in the electrical control panel of the High Velocity Oxy Fuel (HVOF) thermal spraying equipment. The…

An internal explosion occurred in a cone-roof gas oil tank. The explosion completely ruptured the weak roof-to-shell weld seam and projected the roof into the diked area beside the tank. The…