Explosion in an ammonia plant
The event took place in the on one out of the seven reactors for ammonia synthesis. The day of the accident, preparation works for the decennial pneumatic test (previous pneumatic test was carried out in 1978) were started on that unit. The reactor was put out of service and a slow pressurisation with process gases (hydrogen and nitrogen) was carried out at ambient temperature. It was necessary to carry out many pneumatic cycles of pressurisation and depressurisation because of leaks from some flanges. After any cycle, the bolts of the flanges were tightened and a purging with nitrogen at 8 bar was carried out. Eventually, a slow pressurisation with process gases was in progress at ambient temperature when the explosion occurred, 20 minutes after the start, at an internal pressure of 250 bar. The explosion caused one fatality and one injury, destroyed the upper part of the column; metallic parts of the reactor were thrown in a radius of many metres around it. It also caused the complete destruction of the building where the reactor was located.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
The original investigation report is not available. According to the eMARS report (see reference), some experts suggested the possibility that accident occurred due to an internal explosion (deflagration) in the reactor. The ROOT CAUSE could be tentatively attributed to an inadequate testing procedure (too long period between testing, use of flammable gas for testing, failure to correctly identify hazards and mitigate risks)
