Skip to main content

HIAD Classification of the Physical Effects: Hydrogen Release And Ignition


A steam turbine/generator tripped due to an unknown hydraulic control oil system failure. The generator breaker opened, but the emergency valve (throttle valve) did not closed completely. Within 30…
A gas release occurred in the building containing the compressors for the recirculation of process gas of a plant producing fertilisers. The process gas was a mixture of hydrogen and nitrogen. It…
Explosion in a fine organic chemical plant (Seveso classified ) The event occurred during the cleaning of a reactor. At the completion of a batch manufacturing of a soft reducing agent, an operator…
An explosion occurred in the glass components of a reactor at a pharmaceutical plant during a batch process. At the time of the accident, the reactor was being hydrogenated. As a result of the…
A leaking hydrogen line exploded at an oil refinery.
This accident took place in different phases and in two different units of a refinery:It consists first in a non-hydrogen accident, followed by a hydrogen-related accident. Before the hydrogen…
During the polymerization of ethylene in a 750 litres pressurized reactor, an exothermic runaway decomposition occurred and ethylene and its decomposition products were released through the two…
A hydrogen leak followed by an explosion occurred at an elbow of a pipeline cooling system and the separator of the distillation unit. The explosion destroyed the unit and injured two workers.
The event occurred at a hydrogen tank (another source reports a 'conduit in an enclosed space') of a hydrogen generation unit of a refinery. The explosion caused a flare and a displacement of air…
Workers were performing demolition on a disused furnace. While removing a 10 inch valve from a pipe used to supply coke gas fuel to the furnace, flammable liquid was unexpectedly released and ignited…
A deflagration occurred inside the tank at the start of grinding operations. The tank had contained sulphuric acid. All preparatory procedures had been properly carried out: neutralisation of…
The incident occurred in a facility chrome-plating metals. At the time of the event, a metal roller was being chrome-plated. A short circuit occurred due to a defective contacting (contact rails) on…
A wash machine was being used to clean aluminium trays with burnt on product. The auto wash in normal situations cleaned steel trays, and not aluminium. The cleaning fluid contained sodium hydroxide…

Explosion as a result of detonation of gases inside container in turbine section causing 2 casualties .

Explosion in generator area, thought to be hydrogen leak as a result of radial lead seal failure. Extensive plant damage.
The explosion occurred at the second floor of university building, where a postdoc researcher was conducting a chemical experiment using hydrogen gas in the laboratory. First a chemical fire started…

After cooldown of a LH2 system, the operator noticed cold gas issuing from a small hole in a flexible section of the vent line. Subsequent examination revealed that a deflagration had taken place…

During general repair and equipment replacement on a liquid oxygen-liquid hydrogen Saturn test facility, a section of the 24-inch GH2 vent line ruptured. An explosion occurred causing extensive…

During welding of a pipe to an existing header vent system, hydrogen gas was ignited. The adjacent vessels and lines were inerted with helium and a hydrogen detection check did not indi­cate…

A pinhole leak in the discharge hose of a portable tank containing sodium hydride reacted with water, and released hydrogen that ignited and exploded at a waste management plant.