Skip to main content

HIAD Classification of the Physical Effects: Hydrogen Release And Ignition


A blowback occurred when adding iron powder to an EDTA solution at 60 C in a chemical reactor (EDTA = Ethylene-diamine-tetra-acetic acid ). Hydrogen was produced by a chemical reaction and ignited by…
An explosion occurred caused by a leak of hydrogen from a reactor on a fertilizer plant. The blast hurled the head of a hydrogen gas converter 150m and sent it crashing through reinforced-concrete…
Localized corrosion of a FCCU (Fluid Catalytic Cracking Unit) feed hydrotreater recycle hydrogen line by-pass around a hydrogen pre-heat exchanger led to an explosion and fire. The failed part of the…
An employee used a small industrial vacuum cleaner on an unnamed process. During this process, hydrogen gas built up from a reaction between sulphuric acid and aluminium swarf. When the vacuum…

A explosion occurred in the gas and dust treatment system for the aluminium holding furnaces at a metallurgical plant. The explosion caused the failure of the treatment system, the operation of…

An explosion occurred at the fume treatment unit of a foundry. The fumes contained chlorine, used in the metal treatment process. The treatment unit function by spraying water and caustic soda.…

The incident took place in a calcium powdered wire manufactory of "Chepetsk Mechanical Plant". Some amount of water found its way into a container a mix of different powders. As a result of the…
The incident occurred at a silane production plant. A ‘neutralization container’, part of the "Contact Mass Preparation" process unit, exploded. The bursting was caused by the accidental production…
A hydrogen explosion happened at a chemical plant in Cheshire, UK where 18 tons of hydrogen gas went up. The firefighters were on the scene tackling the fire quickly and efficiently.
An explosion occurred at a plant where p-nitrophenol (PNP) is reduced to p-phenetidine with hydrogen. A drum supplying PNP to a hydrogen reduction reactor burst into flames, and part of the…
Explosion due to injection of hydrogen into a furnace containing residual air.
Ignition of hydrogen produced by washing slag in a tank for chlorosulfonic acid.
[Note of HIAD Validator: the presence of hydrogen and its role in the explosion is only one of the two possible explanations of this incident] The explosion occurred in a chemical reactor tank of a…
The accident occurred during the first phase of the batch synthesis of tricarbonyl compound (methylcyclopentadienyl) manganese (TMCM), while the reaction mixture in the reactor consisted of more than…
In a chemical plant, a violent explosion took place during the batch production of chlobenzorex from an aqueous solution of sodium borohydride contained in a feed tank on a movable truck. The reason…
The incident affected a linear alkyl-benzene (LAB) plant. The plant was down for routine maintenance when an explosion occurred. An explosion and fire occurred at a 3000-gallon (approx. 11400 l)…
Two workers were asked to change the piping and support of a feed line into an intermediate storage vessel for hydrochloric acid. The explosion occurred when they opened the gas line and started…

An explosion occurred in a plant producing organic chemistry products, in an autoclave located near a distillation column for acetone and oxygenated solvents. The explosion was followed by a fire…

A lightning strike caused a voltage drop on the power supply of a chlorine-alkali plant using the mercury process. The emergency electrical system was activated, though restoring the external supply…
The incident occurred at the chlorine electrolyser. Failure of a strainer allowed sand from brine filters to get into mercury cells in a chlorine plant. It appears that the sand obstructed the flow…