Skip to main content

HIAD Classification of the Physical Effects: Hydrogen Release And Ignition


An empty 100-m³ reservoir of sulphuric acid (H2SO4) exploded at 9:15 am at a chemical site. Installed directly above its retention basin at a height of several metres, this reservoir was projected…
To repair a corroded flange on a 4500 litre sulphuric acid bowser outlet pipe, an angle grinder was being used to prepare the surface for welding. Within a few seconds of starting work there was a…
A university lab was investigating the production of hydrogen and methane from biomass made of wooden chips or sawdust. The experimental furnace was a concrete cylindrical furnace of the diameter of…
There was a small leak of syngas (a mixture mainly consisting of hydrogen and carbon monoxide) resulting in a localised fire at a bolted flange joint on the outlet carbon steel pipework of the High…
The leak occurred at the ammonia reactor after a technical shutdown of 4 days. When the production was resumed and the syngas compressor restarted 14 hours later, a jet-fire occurred. The Internal…

The incident occurred at the ammonia synthesis unit of a production plant of fertilizers (Seveso III upper tier), during the operation of start-up. The unit was restarting, when a pipe carrying…

Following a trip caused by the safeguarding of an ammonia production line, the syngas released into the atmosphere and ignited.
The event occurred while re-starting the ammonia production unit after a technical stop, a synthesis gas (50% hydrogen, 17% ammonia, methane and nitrogen) leak ignited on a flange located just after…
Two workers were performing maintenance or repair work on a brine surge tank, which potentially contained hydrogen gas in a vapour space in its upper portion. The job consisted in removing and…
Fire of drums containing lithium metal powder: Spontaneous combustion took place at drums containing lithium metal powder which were charged with argon gas for experiments. While lithium metal powder…

During loading of a LH2 storage tank, the vent valve on the tank was opened and then ignition occurred near the instant that the valve was fully open. A light pressure wave was produced. The cloud…

A private car crashed against a hydrogen storage system at the gate of a company processing metals (Seveso plant). The storage consisted in two bundles made of several bottles each, containing…

The incident occurred during the verification operation of a water electrolyser, a high-pressure PEM prototype. This prototype was part of a demonstration project for a hydrogen refuelling station…