Skip to main content

HIAD Event Initiating System: Hydrogen System Initiating Event


A hydrogen leak was discovered inside an auxiliary building of a nuclear power plant recently licensed. The plant had never reached criticality and was in cold shutdown at the time of the event. The…

During the pre-launch checkout, a check valve failed in the "open" position and an accidental venting of liquid hydrogen occurred. The event caused an unscheduled check and replacement…

Safety disc ruptured on LH2 tanker during offloading. The supply was refused due to possible contamination. [Ordin, NASA (1974)]

While disconnecting the liquid hydrogen filling line from the tanker, hydrogen escaped burning the man who was holding the hose; he was burned on hands and stomach. [Ordin, NASA (1974)]

During an LH2 transfer from a tanker, the burst disc ruptured at 50 psi (ca. 3. 5 bar). The operator had turned on the pressure valve and left it unattended, permitting pressure build-up past the…

While pressurizing a liquid hydrogen tanker for the transfer, a rupture disc burst. The tanker pressure was 22 psig (ca. 1. 5 bar). The relief valve was set at 27 to 29 psig (1. 9 to 2 bar). The…

During preparations for off-loading of a commercial tanker, the trailer experienced an overpressure causing the 50 psig (ca. 3. 5 bar) relief valve to open and also the rupture of the 70 psig (ca.…

A full liquid hydrogen tanker was parked off highway to permit drivers to eat and switch seats. While at site, high pressure caused safety devices to function. No fire or damage. [Ordin, NASA…

In an ammonia production unit, a 350-bar leakage of synthesis gas (ammonia + hydrogen) occurred in the compressor room. The leak was the result of the failure of a weld on a line (2") at the outlet…

A liquid hydrogen trailer was delivering hydrogen at a customer site. The operation was occurring at the correct pressure, when one burst disc failed prematurely. No ignition occurred. The…

During a patrol, an operator detects a hydrogen leak in a refinery on a footbridge 30 meters high. The origin of the leak is identified 4 days later on a pipe under insulation. The operator proceeds…
In a fertilizer manufacturing plant, during his inspection round, an operator detected a hydrogen leak at a flange of an exchanger located between the conversion and decarbonisation stages of the…

During the development test of a booster, a 3000 psig (ca. 205 bar) relief valve actuated at the normal line pressure releasing gaseous hydrogen, which ignited, resulting in an explosion which…

A liquid hydrogen tanker had an accident on a highway. The tank was containing only with gaseous hydrogen. When going into curve, the tanker started to weave and pushed to side of road. It rolled…

The accident occurred on highway with a loaded LH2 tanker. the trailer started to jack­ knife after driver applied brakes, it swung around 180° and continued to slide into the shoulder. The…

A tanker returning from a liquid hydrogen delivery and was containing only gaseous hydrogen. The tractor was hit by truck and demolished. The LH2 trailer did not suffer any leak and vacuum was not…

This accident happened on the SS66 road and involved a trailer transporting compressed hydrogen cylinders. The 50 l cylinders were in packages of 16 cylinders each. Due to the breaking of fixing…
A tanker-tractor carrying liquid hydrogen overturned and lost vacuum insulation. The hydrogen boiled and vented, but there was no ignition. The potential for fire or explosion, however, led to…
The incident occurred at one mile from the start of the journey, which probably was a return journey to the base. The driver was making a left turn when the trailer disconnected from the tractor mid…
A liquid hydrogen tanker truck was returning to the home terminal after having delivered the gas to a customer. The driver lost control of the truck, while attempting to avoid a collision with…