Skip to main content

Release of LH2 during transfer (364)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Release of LH2 during transfer

During an LH2 transfer from a tanker, the burst disc ruptured at 50 psi (ca. 3. 5 bar). The operator had turned on the pressure valve and left it unattended, permitting pressure build-up past the allowed 30 psi. Pressure limit for the operation was 30 psi (ca. 2 bar). [Ordin, NASA (1974)]

Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments

The INITIATING CAUSE was the excess of maximal allowed pressure and consequent correct rupture of the burst disc. The ROOT CAUSE was the not following of the prescribed procedure. The operator left pressure valve unattended, permitting pressure build-up past the allowed 30 psi.

Facility Information
Application
LH2 tanker
Specific Application Supply Chain Stage
Components Involved

burst disc

Actual Pressure
0
Design Pressure
0
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Property Loss (onsite)

low

Lessons Learned

Hydrogen transfers are characterised by risks related to frequent connection-connections operations involving a flexible hoses and the series of manual operations required by the operators, who are often also the truck drivers. These operations need strong focus and continuous supervision. The operators need to follow well-designed procedures and be instructed on the consequences of not following them.

Event Nature
Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
References
References

Mishap no 12 in P. L. Ordin, Review of hydrogen accidents and incidents in NASA operations, 1974, NASA TM X-71565 https://ntrs. nasa. gov/citations/19740020344

Also in H2TOOLS https://h2tools. org/lessons/hydrogen-refueling-operational-error