Skip to main content

Road incident CGH2 tube trailer (338)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Road incident CGH2 tube trailer

This accident happened on the SS66 road and involved a trailer transporting compressed hydrogen cylinders. The 50 l cylinders were in packages of 16 cylinders each. Due to the breaking of fixing straps, cylinder packages fell on the middle of the road. The damage to the gas collector of the package and to some cylinders valves caused a gas release with consequent deflagration, with consequent damage to the first vehicle following the truck and to the glass door of house in the vicinity
Event Date
December 23, 2003
Record Quality Indicator
Region / Country
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
The INITATING CAUSE was the breaking or loosing of the fixing strap, which caused one or more H2 cylinder packages falling from the truck. Damage to some the cylinder heads caused release and consequent ignition. The ROOT CAUSE lies in the design of the design supposed to guarantee the integrity of the transport. It is not only about the shortcoming of the strapping system, but also about protecting critical safety elements of the cylinders packaging.
Facility Information
Application
CGH2 cylinders truck
Specific Application Supply Chain Stage
Components Involved
Truck, cylinders rack
Storage/Process Medium
Storage/Process Quantity
12
Actual Pressure
20
Design Pressure
20
Location Type
Location description
DESCRIPTION OF CARGO Each package had a capacity of approx. 12 Kg. Assuming that they were all full, full damage to one package would have released its total quantity. it is however not possible to deduce from the photo how many cylinders' valves failed.
Operational Condition
Pre-event Summary
The truk was travelling on a city road.
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Post-event Summary

Considerable damage to the first vehicle following the truck and to the glass door of house in the vicinity. The photo in the reference shown three packages of 16 cylinders each fallen from the truck. Only one having lost all its cylinders.

Lessons Learned
The analysis of this accident has revealed the followings critical points which shall be used as recommendations: 1. Lack of a system indicating the pressure inside the cylinders. The knowledge of the pressure is critical for the formulation of the correct rescue procedures. 2. Lack of a system visualising/confirming that all the cylinder valves are closed. All valves should be closed during transport. If however a valve was forgotten open, a damage to the gas collector will be enough to release the whole content of that cylinder. 3. The package design did not offer the structural resistance required to protect the cylinders in case of fall-off the trucks.
Event Nature
Emergency Action
The fire brigade cooled the cylinders with by nebulized water. At the same time, they evacuated two persons that were working in the vicinity and closed the road to the traffic. A thermal camera allowed to assess the temperature of the cylinders, therefore assisting the cooling of the hot spots. The last operation was the emptying of the of the cylinders under jets of nebulized water.
Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
Flame Length (m)
1.00
References
References

Munaro et al. , Hydrogen trasport safety: case of compressed Gaseous tube trailer, paper presented at Int. Conference on Hydrogen Safety ICHS 2005. http://conference. ing. unipi. it/ichs2005/Papers/230001. pdf (accessed June 2020)

Also inH2TOOLS https://h2tools. org/lessons/hydrogen-cylinder-transport-accident-results-explosion (accessed Oct 2025)