Skip to main content

HIAD Nature Event - Ignition Source: Hot Surface


SUMMARY The explosion occurred in a catalyst regenerator of the catalytic cracking unit in a fluidized bed during a technical shutdown. A few seconds later, a second explosion is perceived, it is the…
An explosion at a refinery Hydrotreater plant involving a furnace and hydrogen caused by faulty operation. Source of ignition was furnace.
An explosion occurred in a water skim tank associated with a reactor for dehydrogenation of the ethyl benzene. The reaction products from this dehydrogenation reaction consisted in a mixture of…

A explosion occurred in the gas and dust treatment system for the aluminium holding furnaces at a metallurgical plant. The explosion caused the failure of the treatment system, the operation of…

An explosion occurred at the fume treatment unit of a foundry. The fumes contained chlorine, used in the metal treatment process. The treatment unit function by spraying water and caustic soda.…

The incident occurred on a laser cutting system, and affected the top of a water storage tank. The water was used to cool the cutting part. The plant is mainly dedicated to steel cutting, but the…

An explosion occurred in a Dewar used for metals tensile testing at liquefied hydrogen temperatures. The container consisted of vacuum insulated bottom and of cylindrical shaped polyurethane foam…

This event occurred at after the testing of a LH2 tank. The LH2 was then removed and the tank purged with helium gas for more than 4 hours. A flange was then removed to allow for insertion of…

A LH2 tank exploded causing injury and damage when hot wire sensors were used in tank after purging. [Ordin, NASA (1974)]

Explosion within a blast furnace occurred at the plant manufacturing iron. The event occurred at one of the blast furnace of the plant, which exploded. The explosion was so powerful that the entire…
This entry reports only the role of hydrogen in this nuclear accident. For a short description of the initial causes and the incident evolution, see "pre-event summary” and for a much more detailed…
In a polyethylene manufacturing plant, the explosion of a flammable cloud (isobutene, ethylene, hexane and hydrogen) escaped from a reactor during maintenance caused 23 fatalities and 314 injured…
The reduction stage of the powder production process of a chemical plant had been shut down, and the buffer tank of the line had been drained on the preceding day. After the shutdown, the batch to be…
During the polymerization of ethylene in a 750 litres pressurized reactor, an exothermic runaway decomposition occurred and ethylene and its decomposition products were released through the two…
The event occurred at the hydrogen production unit of the ammonia production plant. An air-hydrogen mixture formed in the building hosting a water pump which fed water to a vessel that contained…
The explosion occurred in a copper electroplating plant test furnace when starting the operation of copper plating. A tinned copper pipe had been placed inside another copper pipe and lined with…
In a graphite purification workshop, the cooling circuit of an electric furnace leaks, the water decomposes in contact with materials heated to a temperature of 1,800°C; the gas mixture (hydrogen,…
Explosion in a chemical manufacturing plant for the pharmaceutical and cosmetics industries, classified as Seveso high level,The explosion occurred in the hydrogenation reactor, when opening two…
The accident occurred during the night during the production of a silicon oil- and additive-based waterproofing agent. A junior technician (hired 6 months back), recently assigned to this post, was…
The event started when a gasket in a water pump was blown out. The water pump was situated inside a 100 m long, 10 m wide, and 7 m high building. The pump was feeding water to a vessel containing…