Explosion in a nuclear reactor (Three Mile Island)
This entry reports only the role of hydrogen in this nuclear accident. For a short description of the initial causes and the incident evolution, see "pre-event summary” and for a much more detailed and structured information see references. After almost 2 hours from the start of the incident (a loss of pressurised water supply to the reactor core), the top of the reactor core was only in contact with steam and exposed to the intense heat. This condition enabled the exothermic reaction between the steam and the zircaloy nuclear fuel rod cladding, which produced zirconium dioxide, hydrogen, and additional heat. This reaction melted the nuclear fuel rod cladding and damaged the fuel pellets, which released radioactive isotopes to the reactor coolant. The hydrogen accumulated to a bubble in the reactor and is believed to have caused a small explosion in the containment building several hours later.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
The INITIAL CAUSE was the failure of the pumps of the secondary water loop followed by a pressure relief valve in the primary system which failed in the pen position. An escalation followed because of the plant operators failed to recognize that a loss-of-coolant accident was occurring. ROOT CAUSES are related to (1) to signals not well designed for this emergency or defective (design flaws, including poor control design), and (2) to the fact that the operators were ill-prepared (lack training, inadequate operative procedures).
