Explosion in the process reactor of a silicon production plant
The accident occurred during the night during the production of a silicon oil- and additive-based waterproofing agent. A junior technician (hired 6 months back), recently assigned to this post, was left without supervision to manage a process modified very recently and executed only for the second time. In the process, the order of addition of reactants was not specified. The technician loaded first 800 kg of oil into the tank at first floor, started heating the reactor, and descended to the ground floor to pump the reagent. When going up to the second floor to fill a tank with water, he observed a kind of fog escaping from the tank. The explosion of the tank followed, caused by the formation of hydrogen (and perhaps also sodium hydride, NaH) from the decomposition of the silicon oil after the abrupt and uncontrolled addition of an extremely basic alcoholate (wrong pH control). The fire that ensued consumed 500 tonnes of chemicals (mainly alcohols), spread to significant part of the site (7,000 m2) and resulted in a huge cloud of smoke. The technician was severely injured, 2 responders injured and 15 intoxicated by CO during the emergency.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
INITIATING cause was a wrong procedure for chemical production process ROOT CAUSES were a ill-defined procedure, and insufficient training of personnel. Contributing causes was the unavailability of detailed and updated inventory of the chemicals stored on site and inadequte emergency plan.
