Skip to main content

HIAD Specific Application Supply Chain Stage: Unintended Hydrogen Production - Chemical Reaction


The incident occurred at a chemical laboratory of a university. Six students were conducting experiments on producing nitrification carriers for waste leaching when an explosion followed by a fire…

The accident occurred in the organo-metallic compound production unit, on a transport container for aluminium alkyls, which exploded during a cleansing process at the washing station. The incident…
At a rubber factory, an explosion occurred inside a lubricant container filled with 18 tonnes of tri-(nonylphenyl) phosphate (TNPP or TNPA). This tank was typically stirred and maintained at 45°C.…
An explosion and fire occurred at a chemical plant applying silicone coatings. The blast occurred when some polymethyl hydrogen siloxane was accidentally fed into a reactor, together with the correct…
This incident occurred when subcontractor two workers were widening air vents on the roof of a building hosting a tank containing hydrogen chloride solution. This intervention was necessary to to…
An hydrogen explosion occurred within the off-gas system, causing the stop of the sump pump; subsequently both trains of the standby gas treatment system were declared inoperable. The sump is part of…
At a soaking facility of an industrial plant in the metallurgy sector, the pipeline between a supply tank and a feed pump became clogged and the autoclave only received sporadic feed. Problems had…
A welder was welding a stainless steel drain pipe with an arc welder, above a sulphuric acid storage tank. When he lowered the pipe, the hydrogen gas in tank ignited causing an explosion and one…
A blowback occurred when adding iron powder to an EDTA solution at 60 C in a chemical reactor (EDTA = Ethylene-diamine-tetra-acetic acid ). Hydrogen was produced by a chemical reaction and ignited by…
An employee used a small industrial vacuum cleaner on an unnamed process. During this process, hydrogen gas built up from a reaction between sulphuric acid and aluminium swarf. When the vacuum…

A explosion occurred in the gas and dust treatment system for the aluminium holding furnaces at a metallurgical plant. The explosion caused the failure of the treatment system, the operation of…

An explosion occurred at the fume treatment unit of a foundry. The fumes contained chlorine, used in the metal treatment process. The treatment unit function by spraying water and caustic soda.…

The incident occurred at a silane production plant. A ‘neutralization container’, part of the "Contact Mass Preparation" process unit, exploded. The bursting was caused by the accidental production…
Explosion due to injection of hydrogen into a furnace containing residual air.
Ignition of hydrogen produced by washing slag in a tank for chlorosulfonic acid.
[Note of HIAD Validator: the presence of hydrogen and its role in the explosion is only one of the two possible explanations of this incident] The explosion occurred in a chemical reactor tank of a…
The accident occurred during the first phase of the batch synthesis of tricarbonyl compound (methylcyclopentadienyl) manganese (TMCM), while the reaction mixture in the reactor consisted of more than…
In a chemical plant, a violent explosion took place during the batch production of chlobenzorex from an aqueous solution of sodium borohydride contained in a feed tank on a movable truck. The reason…
The incident affected a linear alkyl-benzene (LAB) plant. The plant was down for routine maintenance when an explosion occurred. An explosion and fire occurred at a 3000-gallon (approx. 11400 l)…
Two workers were asked to change the piping and support of a feed line into an intermediate storage vessel for hydrochloric acid. The explosion occurred when they opened the gas line and started…