- Home
-
Resources
- Center for Hydrogen Safety
- Hydrogen Fuel Cell Codes and Standards
- Paper & References
- Web-based Toolkits
- Workforce Development

- Contact
- About H2Tools
A gas manufacturing plant, one pallet consisting of nine (9) cylinders fell to the ground. The discharge valve of one cylinder (261 cubic feet of hydrogen) was damaged and the entire hydrogen…
This event occurred at the hydrogen 70 MPa dispenser of a refuelling station during the testing phase. Just after the start of the refuelling test, at a pressure of approximately 13 MPa, the…
A truck carrying hydrogen cylinders on a village road had to execute an emergency manoeuvre to avoid an oncoming vehicle which had crossed the centre line. The truck hit the curb and overturned.…
The incident occurred at a pulp mill plant producing fluting media. The explosion took place at a pulp storage tank and was caused by the combustion of a hydrogen-ammonia gas mixture. The roof of…
A small hydrogen cylinder was beeing filled at a facility for high-pressure testing. The cylinder had a nominal working pressure of 2000 psi (approximately 140 bar) and the filling a target…
A truck loaded with two hydrogen pallets was traveling on a highway, when it was hit by a car turning right. The truck rolled over, and the impact damaged part of the collector pipe, causing the…
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.