Skip to main content

HIAD Nature Event - Ignition Source: Other


A vessel exploded at a plant producing pharmaceutical products. At the time of the incident, the plant was producing a substance called Dekon 139. The Dekon had already been synthesised, and…

A tank received, after a negative reactivity test with the bottom supernatant of the tank, 20 m³ of methyl hydro-dichloro-silane, then 24 m³ of a mixture of oil and tar (negative reactivity test) and…
An employee was preparing a batch of glycol stearate emulsifier in a vessel. Upon completion of product, the quality control lab reported that the pH was too high and the product needed to be…

A runaway chemical reaction happened in a reactor containing methanol and a substance to be hydrogenated. A large quantity of hydrogen was released; a balloon containing a borohydride exploded.…

The event occurred at an ethylene production plant. The plant was shutdown at the time as the supply of compressed air to the gauges had inadvertently been switched off. This failure of the air…
A reactor of a wide-range hydrocracking unit being operated by computer at 2500 psi (170 bar) failed explosively due to localised heating. Resulting explosion caused injuries and widespread damage to…
An explosion and fire occurred at a chemical plant applying silicone coatings. The blast occurred when some polymethyl hydrogen siloxane was accidentally fed into a reactor, together with the correct…
The explosion occurred in a chemical plant manufacturing raw materials for cosmetics. Fluoro-nitro-benzene and liquid chemicals were mixed in a high-pressure reactor for the development of a new…
The incident occurred at a silane production plant. A ‘neutralization container’, part of the "Contact Mass Preparation" process unit, exploded. The bursting was caused by the accidental production…
The accident occurred during the first phase of the batch synthesis of tricarbonyl compound (methylcyclopentadienyl) manganese (TMCM), while the reaction mixture in the reactor consisted of more than…
In a chemical plant, a violent explosion took place during the batch production of chlobenzorex from an aqueous solution of sodium borohydride contained in a feed tank on a movable truck. The reason…
At 11:15 pm, an explosion followed by fire occurred in the vicinity of the measurement transformer on an isolated 90,000 V electrical oil transformer at a plant manufacturing technical polymers.…

An explosion occurred in the venting system of a metal grinding CNC-unit. The explosion has been attributed to the unexpected reaction between the water used for the cooling of the grinding and…

The event occurred in a plant specialised in the production of metallic sodium and lithium. The plant is clssified Seveso high tier. An explosion, with generation of smokes, took place in the unit…

A pinhole leak in the discharge hose of a portable tank containing sodium hydride reacted with water, and released hydrogen that ignited and exploded at a waste management plant.

This incident took place at a plant specialised in production of sodium, lithium, and chlorine. A hydrogen explosion occurred during the hydrolysis of sodium residues in a dedicated workshop.…

The explosion was caused by the ignition of hydrogen during reaction with sodium metal. The Chemistry Department routinely dried solvents using metallic sodium. This leaves an excess of sodium metal,…
Five barrels of aluminium dust that had been removed from an outdoor dust collector were sealed and stored in the plant adjacent to electrical panels. One of them had somehow been contaminated with…
The event started at the effluent pipe of one of the hydro-cracking reactors, which broke and released a mixture of hydrogen, light gases (methane, butane), light gasoline; heavy gasoline; gas oil.…

The incident occurred when cleaning the exhaust gas-processing equipment at a semiconductor factory. The inside of the water scrubber was washed with hydrofluoric acid. This is a normal operation…