Skip to main content

HIAD Nature Event - Ignition Source: Open Flame - Welding


A welder was welding a stainless steel drain pipe with an arc welder, above a sulphuric acid storage tank. When he lowered the pipe, the hydrogen gas in tank ignited causing an explosion and one…
An employee was attempting to re-weld a lifting point on a brazing furnace cover. He was using a tungsten inert gas (TIG) welding machine to build up an attachment point on the cover when an…
The explosion occurred during repair work on a boiler. A technician had previously descaled the device using hydrochloric acid, after which he performed the neutralisation step with soda and drained…

During welding of a pipe to an existing header vent system, hydrogen gas was ignited. The adjacent vessels and lines were inerted with helium and a hydrogen detection check did not indi­cate…

The event occurred during welding works which ignited accidentally released hydrogen. The plant had been partially shut down for repairing works to a pipe affected by internal cracks. The repairing…
At an agrochemical plant, an explosion occurred near a drained hydrofluoric acid tank, when 4 employees were welding on adjacent pipelines. An investigation was launched to determine this accident’s…
A tank "filled with low-pressure hydrogen" exploded at a food manufacturing plant, killing three workers. The accident occurred when the workers were welding inside the tank after clearing hydrogen…
A hydrogen leak occurred on the a coolant pipe of an electrical generator located in the turbine building, at 200 m from the reactor. Because of the welding works ongoing at that moment on the pipe,…
A leak occurred at an underground steel pipeline (6 inch) transporting pressurised hydrogen (75 bar). The leakage lasted for at least several hours, but it cannot be excluded that the leakage started…
During repairs of a heat exchanger in a benzene plant, a mixed gas (methane and hydrogen) contained in the cold box attached to the exchanger leaked and caught fire from a welding spark. The…
A leak occurred on a 4 inch hydrogen main gas line which ran along a pipe bridge at the east end of a first stage compression plant building. The relased hydrogen ignited. The source of ignition was…

While welding cable suspended over stainless steel H2 instrument line, two holes were burned through tubing. A hissing sound was heard and operator closed a valve. In feeling for gas leak which…

The explosion occurred when a spark from welding equipment ignited flammable vapours from a 415,000-gallon (ca. 1. 5 million of litres) sulphuric acid storage tank at the refinery. The investigation…
A hydrogen fire occurred in a nuclear power plant outside the controlled area. The leaking point was on a pipe system of the distribution circuit of the gas network (6 bar nominal working pressure).…
On February 3, 1994, a control room operator at Surry Power Station, Unit 1, observed pressure spikes on the pressurizer level instruments. At the same time, a loud rumbling sound was heard in the…
The accident took place when replacing a pallet of empty hydrogen cylinders with a new full one. The pallet in service (almost empty) was not disconnected from the gas supply line. When the operator…