- Home
-
Resources
- Center for Hydrogen Safety
- Hydrogen Fuel Cell Codes and Standards
- Paper & References
- Web-based Toolkits
- Workforce Development

- Contact
- About H2Tools
During the development test of a booster, a 3000 psig (ca. 205 bar) relief valve actuated at the normal line pressure releasing gaseous hydrogen, which ignited, resulting in an explosion which…
The incident occurred on a large LH2 stationary storage tank at an aerospace testing facility. The cryogeninc tank experienced a significant vacuum leak in the insulation annulus, which eventually…
The pressurisation line on the nozzle skirt of a liquid hydrogen tank ruptured at welded section. Two tests were underway at the same time; one was a pressure test up to 1850 psi (ca. 128 bar) in…
During sampling tests on a facility LH2 dock transfer system, the system was pressurized to 15 psig when an expansion joint ruptured. Technicians proceeded with the pressure cycle with the main…
An unscheduled venting of a stage LH2 tank occurred, creating a hazardous condition for personnel and creating a potential explosion/ fire. [Ordin, NASA (1974)]
During loading of a LH2 storage tank, the vent valve on the tank was opened and then ignition occurred near the instant that the valve was fully open. A light pressure wave was produced. The cloud…
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.