- Home
-
Resources
- Center for Hydrogen Safety
- Hydrogen Fuel Cell Codes and Standards
- Paper & References
- Web-based Toolkits
- Workforce Development

- Contact
- About H2Tools
A Bourdon tube ruptured in pressure gauge after 528 hours of operation in LH2. The alarm sounded, the system was isolated and then vented. [Ordin, NASA (1974)]
During the warm-up phase of a large liquid hydrogen sphere, the annular space was over-pressurised and perlite insulation was expelled through the evacuation nozzle and the burst diaphragm. Air…
A large hydrogen vapor cloud was released from the base of a bulk hydrogen storage tank, at special gas company. The cloud found an ignition source producing a large fireball, shook windows in the…
An explosion occurred in a hydrogen storage tank followed by fire.
A LH2 tank exploded causing injury and damage when hot wire sensors were used in tank after purging. [Ordin, NASA (1974)]
This incident consisted in the dropping of a gas cylinder and the release of its content due to stress corrosion
The incident occurred during the filling of six bundles of compressed hydrogen cylinders by means of a compressor. Each bundle consisted of 16 cylinders of 40-liter each. When approaching the…
A leak occurred near the bottom of a stationary liquid hydrogen tank with a capacity of a 6,000-gallon. The leak was localised on a valve and was visible due to the air condensation forming white…
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.