Leak during LH2 transfer
During a transfer of liquid hydrogen from a commercial tanker to a stationary receiving vessel, a leak developed in the bayonet fitting at trailer-vessel connection. The leak produced a hydrogen spray which enveloped the rear of the truck where the hand-operated shutoff valve was located. Emergency trained personnel, wearing protective clothing, except for proper shoes, entered area and shut off flow control valve. The personnel suffered frost-bite of their feet when shoes became frozen to water-wetted rear deck of truck. [Ordin, NASA (1974)]
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences

INITIATING CAUSE A loose hose flange connection allowed leakage of cold fluid through the hydrocarbonlubricated bayonet seal. This caused the cold fluid to enter in contact and shrink the "O" ring seal, which was made of rubber. The shrinking of he rubber ring caused the liquid hydrogen to leak into the atmosphere. ROOT and/or CONTRIBUTING CAUSES The hand-operated shutoff valve was not accessible because affected by the cryo-spill. This was a design shortcoming. Why was the hose flange loose? This could suggests failing to carefully follow the procedures. Why did the responders crew accessed the LH2 leakage one without the proper shoes protection? This could hint at a procedure shortcoming and/or to human errors.