Skip to main content

Release of hydrocarbons mixture from a pressure vessel (567)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Release of hydrocarbons mixture from a pressure vessel

A release of contents of a pressure vessel occurred when a longitudinal weld tore open. The vessel had been shut down and had just been put into use again when the incident occurred. The gas mixture contained hydrocarbons with 30% hydrogen. It had reached its working pressure of 31 bar, but was only at -26 degrees C, instead of the working temperature of -73 degrees C, no liquid was present. An investigation found a crack, 1. 6 metres long, had formed near the upper end of the weld.
Event Date
June 7, 1996
Record Quality Indicator
Region / Country
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments

The recommendations issued after the incident, suggest that the ROOT CAUSE could be a lack of proper inspection, and/or inspection performed with inadequate tools

Facility Information
Application Type
Application
unspecified
Specific Application Supply Chain Stage
Components Involved
weld, vessel
Storage/Process Medium
Actual Pressure
3
Design Pressure
3
Location Type
Location description
PROBABLE PROCESS Although not specified by the source, the event occurred very probably at a vessel used to distillation and gas separation processes of the refinery, for example in what is commonly called a ‘cold box’. This assumption is based on temperature data provided. Propane, for example, liquifies at -42 C, it is therefore still gaseous at 31 C (the temperature at which the release occurred) and liquid at -73C, corresponding to the liquid nitrogen temperature, which probably was used as coolant vector,
Operational Condition
Pre-event Summary
The vessel had been shut down and had just been put into use again when the incident occurred.
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Lessons Learned
Inspection procedures had not been developed for many operations, including measuring temperature from outside field panels underneath the reactors. This hints at a poor process hazard assessement, that did not even reflect the actual equipment degradation and instrumentation used in the process. The following recommendations were made: 1. All vessels of similar construction to be tested for incipient cracks on the inner surface by using a dye penetration test. 2. If the interior is inaccessible, welds and impact zones are to be tested by ultrasonic methods.
Event Nature
Release Type
Release Substance
hydrocarbons 70% H2 30%
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

Event nr 12735 of the UK database ICHEME in PDF ICHEME database is no longer available, but data can be download as PDF for free. https://www. icheme. org/knowledge/safety-centre/resources/accident-data/ (accessed October 2020)

Primary source in Chemical Hazards in Industry, No. 1 January 1998. (unavailable)