Over-pressurisation of a LH2 tanker
An empty tanker was returning to the home terminal after delivery to a customer. However, the drivers had failed to properly stabilize the residue pressure in the tank before departing from the customer site. This caused a pressure increase during the journey back. The drivers noticed the pressure increase and stopped in a remote area at an exit ramp service road, There they manually released the tank pressure by venting part of the residual hydrogen succeeding in stabilising the pressure. They continued on to their home terminal without further incident (approximately 6 hr driving).
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
The INITIAL CAUSE was over-pressurisation of the LH2 tank, which caused an intevention of the drivers to reduce pressure. The ROOT CAUSE was the failure in stabilising tank presssure after having performed the LH2 transfer.
