Skip to main content

Leak from a LH2 tank (389)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Leak from a LH2 tank

A leak occurred at the fill valve of a LH2 vessel. With the tank pressure at about 100 psi a leak was noticed. The area was cleared and the vessel was emptied by remote controls. [Ordin, NASA (1974)]

Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments

The leak was caused by valve stem packing failure. Nothing is known on the ROOT CAUSE.

Facility Information
Application Type
Application
Aerospace
Specific Application Supply Chain Stage
Components Involved

LH2 tank, valve

Storage/Process Medium
Actual Pressure
0
Design Pressure
0
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Environmental Damage
0
Property Loss (onsite)

0

Property Loss (offsite)

0

Post-event Summary

Only loss was the tank content, quantity not reported.

Event Nature
Emergency Action

The system was borught in a safe condition by venting tank content through a remote operation. How the leak was ' noticed' was not reported.

Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
References
References

Mishap no 48 in P. L. Ordin, Review of hydrogen accidents and incidents in NASA operations, 1974, NASA TM X-71565 https://ntrs. nasa. gov/citations/19740020344

Lowesmith et al. , Safety issues of the liquefaction, storage and transportation of liquid hydrogen: An analysis of incidents and HAZIDS, Int. J. Hydrogen energy (2014) https://doi. org/10. 1016/j. ijhydene. 2014. 08. 002

Hankinson and Lowesmith, Qualitative Risk Assessment of Hydrogen Liquefaction, Storage and Transportation, FCH JU project IDEALHY, Deliverable 3. 10 (2013) confidential (accessed October 2025)