Ignited hydrogen leak at an aerospace testing facility
The event occurred in a university research building dedicated to the study of the take-off of space launchers . An operator gave the alarm during the hydrogen pressure pre-setting phase. he had seen on the video surveillance screen a flame at a pressure regulator on the line located on the walkway above the test hall. One of the operators closes the supply line and triggers the purge. According to the ARIA report, two combined equipment failures caused the damage: - a hydrogen leak on the pressure regulator; - an electrical short circuit on one of the equipment in the environment near the regulator. The latter was caused either by a material defective of a system temporarily installed on the bridge for experimentation, either by over-voltage due to accumulation of moisture in one of the elements of the electrical circuit following a water leak the day before.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
The INITIATING cause was the combination of the technical failures, (the pressure regulator leak and short-circuit on an equipment). The root cause is unknown, but probably related to the operational aspects for a better monitoring/control of materials and equipment.
