Skip to main content

Hydrogen venting from LH2 tanker due to overpressure (153)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Hydrogen venting from LH2 tanker due to overpressure

While travelling to deliver liquid hydrogen to a customer, a tanker experienced an increase of the internal pressure of the cargo tank. The drivers pulled off the road and at that moment the pressure relief system activated. They operated a diverter valve, transferring the cargo tank to the second redundant pressure relief system. About 150 lbs. (68 kg) of product was lost. The delivery was then continued without further incident.

Event Date
July 14, 2003
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments

The INITIAL CAUSE was probably due to over-pressurisation of the LH2 tank, which triggered a hydrogen venting. The PHMSA does no report if the over-pressurisation was due to degradation of the vacuum shell. From the fact that the journey continued without further incidents, it could be concluded that the over-pressurisation had been caused during loading of the tanker, so that the ROOT CAUSE could be failure to execute the procedure properly.

Facility Information
Application
LH2 tanker
Specific Application Supply Chain Stage
Components Involved

PRD

Storage/Process Medium
Storage/Process Quantity
385
Location Type
Operational Condition
Pre-event Summary

The PHMSA reports a loss of 150 lbs, i. e. 68 kg. On the contrary, the PHMSA corresponding column report a loss of only 18. 8 LGA, i. e. 5 kg. Also the transport capacity is doubtful, 1437. 5 LGA, corresponding to only 385 kg, which is ten time less than the usually transported values.

Consequences
Number of Injured Persons
0
Number of Fatalities
0
Environmental Damage
0
Currency
Property Loss (onsite)

135

Post-event Summary

Less than 100 kg of hydrogen was lost.

Event Nature
Emergency Action

The dirvers swithed the tank safety system to the an alternative, redundant one

Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
References
References

Incident I-2003071049 of the US Pipeline and Hazardous Materials Safety Administration PHMSA: https://portal. phmsa. dot. gov/analytics/saw. dll?Portalpages&PortalPath=%2Fshared%2FPublic%20Website%20Pages%2F_portal%2FHazmat%20Incident%20Report%20Search (accessed September 2024)