Failure of a GH2 tank due to over pressure
During the J-2 engine testing program, the engine start tank was pressurised. The pressure raised to an excess of 1500 psi (ca. 105 bar). The venting of the tank was attempted but remained pressure remained high. It was then assumed that the pressure instrumentation had failed. A blowdown was initiated through engine, but the start tank ruptured and fire engulfed test stand area. The rupture of tank caused damage to engine and test stand facility. [Ordin, NASA (1974)]
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences

The INITIATING CAUSE was the rupture of a hydrogen tank due to overpressure. When the tank failed, the internal pressure was probably approximately 2900 psi (ca. 195 bar), far above the maximum allowed 105 bar. Water was found in the vent manifold where the start tank vent line connects to the manifold. It was believed that an ice blockage prevented the venting as any relief action by the vent or relief valve. The ROOT CAUSE was a combination of (1) over-pressurisation of the tank, probably due to a wrong (application of the) pressurisation procedure, (2) a system design defect allowing formation of water in the vent, (3) wrong assumption by the operators, who assumed a wrong reading of instrument when the venting failed.