Skip to main content

Release from a pipe in a ammonia production plant (25)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Release from a pipe in a ammonia production plant

Furnace tube leak caused excessive heat on H2 tube causing rupture [Zalosh and Short, 1978]
Event Date
September 1, 1975
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments

The INITIATING CAUSE is unclear. A non specified tube leaked causing a hydrogen tube to fail due to over-heating. was the loss of containment due to a failing gasket (of a joint/valve)/ ROOT CAUSE unknown.

Facility Information
Application Type
Application
Ammonia production
Specific Application Supply Chain Stage
Components Involved
hydrogen piping, ammonia reactor
Storage/Process Medium
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Currency
Property Loss (onsite)

5000

Event Nature
Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

Extract from Table II of Appendix A of Zalosh and Short COMPARATIVE ANALYSIS OF HYDROGEN FIRE AND EXPLOSION INCIDENTS Quarterly Report No. 2 for Period December 1, 1977 - February 28, 1978 https://www. osti. gov/biblio/6566131 (accessed September 2020)