Skip to main content

Over-pressurisation of a LH2 tanker (482)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Over-pressurisation of a LH2 tanker

When travelling to a customer, a liquid hydrogen tanker experienced a slight tank pressure increase due to an improper cooling down. The driver was carefully monitoring the pressure and when he observed the pressure rise about the normal level, he called the central logistics contact and reported the situation. The driver was advised to manually operate a hydrogen vent to re-stabilise the internal pressure. After having succeeded in doing so, the driver could restart without no further pressure problem during the trip (approximately 7 hr).

Event Date
November 4, 1996
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments

The INITIAL CAUSE was over-pressurisation of the LH2 tank, which caused an intevention of the drivers to reduce pressure. The ROOT CAUSE is the to degradation of the thermal insulation capacity of the tank.

Facility Information
Application
LH2 tanker
Specific Application Supply Chain Stage
Components Involved

vacuum thermal insulation

Storage/Process Medium
Storage/Process Quantity
3486
Location Type
Operational Condition
Pre-event Summary

The LH2 tanker was full

Consequences
Number of Injured Persons
0
Number of Fatalities
0
Environmental Damage
0
Currency
Property Loss (onsite)

200

Property Loss (offsite)

0

Post-event Summary

1. 3 kg hydrogen were released.

Event Nature
Emergency Action

The driver was carefully monitoring the pressure and when he observed the pressure rise about the normal level, he called the central logistics contact and reported the situation, was advised to manually operate a hydrogen vent to re-stabilise the internal pressure. After having succeeded in doing so, the driver could restart without no further pressure problem during the trip

Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
References
References

Incident I-1996110732 of the US Pipeline and Hazardous Materials Safety Administration PHMSA: https://portal. phmsa. dot. gov/analytics/saw. dll?Portalpages&PortalPath=%2Fshared%2FPublic%20Website%20Pages%2F_portal%2FHazmat%20Incident%20Report%20Search (accessed September 2024)