Skip to main content

Hydrogen line leakage in a metal production plant (334)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Hydrogen line leakage in a metal production plant

In a metal production company, a leak occurred on valve of a hydrogen line. A new valve was ordered. Almost one month later workers arrived on site to replace the valve. After one hour they heard an explosion. Two men went to investigate and saw flames coming from the hydrogen pipe that was being repaired. They ran outside to isolate the hydrogen line One worker had burnt his arm. The hydrogen regulator was burnt and a new one had to be fitted.
Event Date
May 23, 2001
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments

The INITIATING CAUSE was the leak of a hydrogen valve during replacement. CONTRIBUTING CAUSE was the fact that the workers fitted the new regulator and valve, but did not test the tightness of the new installation because the pipe was too hot. This hint as well to a lack of good procedures.

Facility Information
Application Type
Application
generic metal processing
Specific Application Supply Chain Stage
Components Involved
Hydrogen line, valve, regulator.
Storage/Process Medium
Location Type
Operational Condition
Pre-event Summary
One month before the incident, a valve started leaking. The incident occurred when contractor's workers were on site to replace it.
Consequences
Number of Injured Persons
1
Number of Fatalities
0
Event Nature
Emergency Action
Two workers ran outside to isolate the hydrogen. When returning to the scene of the event, they found a colleague had suffered burns to the arms.
Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

Event description provided by HSE, original source confidential