Skip to main content

Fire in a plant producing electronics components (36)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Fire in a plant producing electronics components

The hydrogen release of a defect valve on the hydrogen supply line ignited due to an unknown cause. The fire caused the melting of soldered joint with consequence additional release of hydrogen at 6. 2 bar, which contributed the fire.
Event Date
October 4, 1968
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
The INITIATING CAUSE was a defective component: a valve was reported as closed, but it was leaking. The ROOT CAUSE is unknown.
Facility Information
Application
electrical & electronic products
Specific Application Supply Chain Stage
Components Involved
valve, soldered joint
Storage/Process Medium
Actual Pressure
0
Design Pressure
0
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Environmental Damage
0
Currency
Property Loss (onsite)

5500

Property Loss (offsite)

0

Post-event Summary

No injuries, 5500 $ material losses

Event Nature
Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Release Pressure (bar)
6.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
Flame Type
References
References

Table II of Appendix A of Zalosh and Short COMPARATIVE ANALYSIS OF HYDROGEN FIRE AND EXPLOSION INCIDENTS Quarterly Report No. 2 for Period December 1, 1977 - February 28, 1978 https://www. osti. gov/biblio/6566131 (accessed September 2020)