Fire on a hydrogen bus
The incident occurred in a workshop of a bus company. Hydrogen leaked from a tank on a new hydrogen and fuel cell bus parked there. The cause of the leak is unknown. From conversations with the persons directly involved, the hydrogen bus had recently been delivered to the bus company, and few days before the fire, a maintenance training had been given engineers, followed days later, the trained people plugged the bus to a fast charger. As soon as the bus was plugged they heard three loud bangs and they run away in panic. On the contrary, the fire fighters post-accident investigation reports that were few seconds between a first puff and the explosion. The released gas ignited before the hydrogen detection system could detect hydrogen. Multiple jet fires followed; one of the jet fires was horizontal instead of vertical because the outlet tube was bent. The fire extended to a diesel bus and to workshop materials. The whole workshop and the two buses went lost. It is unclear how much hydrogen was in the bus on board tanks and which safety measures kicked in. The workshop had sensors to detect hydrogen and to open roof windows if hydrogen was a specific concentration level in air. Nobody was injured, but the fire brigades met several challenges in their fire-fighting strategy. The intervention last for several hours.
Event Date
October 28, 2021
Record Quality Indicator
Region / Country
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
The INITATING CAUSE has been reported as a leak of hydrogen, which ignited triggering the opening of the TPRD’s. Nothing is known on the cause of the leak. Theoretically, the starting point could have been the accumulation of hydrogen under the bus bonnet and its ignition from an electrical spark; or, alternatively it could also have been a unplanned opening of one TPRD. Due to the confined location and a horizontal jet fire, a domino effect followed involving all flammable materials in the workshop. The ROOT CAUSE is of difficult identification. The bent vent pipe creating a horizontal flame, the possible presence of ignition sources and the vicinity of other buses suggest shortcoming risk assessment and procedures. Also, according to the fire fighters, the workshop configuration created a air circulation feeding the fire.
