Skip to main content

Fire in cyclone (617)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Fire in cyclone

The accident occurred on the hopper fine powders from a pair of cyclones (the hopper is the bottom conical part of the cyclone collecting the powder/dust separated from gas phase). A bursting disc ruptured on the hopper. , releasing ethylene and hydrogen gases, followed by a flash and explosion. Two men were injured.
Event Date
September 17, 1975
Record Quality Indicator
Classification of the Physical Effects
Nature of the Consequences
Causes
Facility Information
Application Type
Application
Unknown
Specific Application Supply Chain Stage
Components Involved
bursting disc, hopper, cyclone
Location Type
Operational Condition
Pre-event Summary
Apparently, the event occurred during normal operation
Consequences
Number of Injured Persons
2
Number of Fatalities
0
Post-event Summary

Two men received 2nd degree burns over 25% body surface.

Lessons Learned
According to the ICHEME report (see references), the recommendations/ issued were: 1. Fit a "stack" to the disc stub, to direct any emission away from personnel. 2. Automate operations as far as practicable to minimise operator/equipment interaction.
Event Nature
Release Type
Release Substance
C2H4 H2
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
Flame Type
References
References

Event description extracted from the UK database ICHEME in PDF ICHEME database is no longer available for purchase, but data can be download as PDF for free. https://www. icheme. org/knowledge/safety-centre/resources/accident-data/ (accessed October 2020)