Explosion
The explosion occurred at a ramjet engine of an aerospace testing centre. In order to carry out an airtight test on the engine, a pressure gauge was connected, the bolts on the hydrogen supply pipe flange removed and a closing plate inserted. After the successful tightness test, the closing plate was removed and the connection between the hydrogen supply and the engine was restored. A preliminary ramjet engine combustion test was started with air, oxygen, and hydrogen. However, the bolts had been wrongly tightened with an O-ring protruding from the groove on the flange and the pressure gauge main valve had not been not properly closed. This caused a hydrogen gas leak followed by an explosion occurred when the combustion test was ignited.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes

The INITIATING CAUSE was a hydrogen leak due to wrong installation of the connections The ROOT CAUSE could have been a human error and/or lack of proper instructions/procedures