CGH2 trailer roll-over and fire
A tube trailer-tractor transporting compressed hydrogen was travelling on a highway, when the driver lost the control of the vehicle trying to avoid an obstacle on the road. The vehicle collided with the central guardrail, tipped over on the other side and the tubes became loose and spread across the motorway. At least one of the 22 tubes started releasing its contents. The tractor caught fire, and probably because of this, also the leaking hydrogen ignited and the fire propagated. The sources are unclear on the number of the tubes which eventually released their content. The first responders created a safety distance of 300 m and interrupted the traffic in both directions on the highway and on the parallel roads. They used a thermal imaging camera to determine the locations where the hydrogen was released and concentrated the efforts on cooling the hydrogen tubes. Since closing the valves on the tubes would have been a too great risk, it was decided to let the hydrogen burn and extinguish by controlling the fire. As soon as the flow of hydrogen had stopped, the tubes were inspected. Few tubes that had not yet been emptied, were emptied manually by the experts of the transporting company using a blow-off installation. The tubes and the truck were then recovered by means of a crane. The road surface had to be repaired, because it had been exposed to temperature up to 2000 degree Celsius and half-meter holes had formed. The highway remained closed one week.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
The INITIATING CAUSE for the driver to lose control was a reserve wheel on the road, lost by a previous vehicle due to the failure of a welding fixing the wheel. The presence of a reserve wheel on the road, lost by a previous vehicle due to the failure of a welding fixing the wheel, was the reason for the CGH2 trailer driver to lose control of the vehicle. The ROOT CAUSE could be a human error, but why the wheel was lost is unclear. By proxy with other cases caused by conventional material failures, it could be concluded that loosing a wheel on a road is the effect of inadequate inspection and maintenance.
