Release of hydrogen and hydrogen sulphide in a refinery
A release occurred following the rupture of a pipe of 250 mm in diameter. 350 kg were released to the atmosphere in 11 minutes, consisting in 80% of hydrogen, 5% of hydrogen sulphide (H2S) and 4% of water and hydrocarbons. Although the ARIA report (see references) does not mention it, the unit affected was very probably the oil desulphurisation unit. The mixture was both toxic and flammable. H2S detector and explosimeters alarms were triggered and the operating staff cut off the supply. The cloud dispersed but the area of irreversible effects for H2S has remained within the site.
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
According to the ARIA report (see references), the rupture could have been caused by the corrosion of a section of the line with a rather complex geometry (2 successive bends in 3 dimensions). Nothing is said regarding the cause of the corrosion, but it is known that H2S is a corrosive substance for metals.
