Skip to main content

Pipe rupture and fire at a refinery (581)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Pipe rupture and fire at a refinery

A series of explosions at an oil refinery reformer unit caused by a rupture to an 8 inch naphtha and hydrogen feed pipe. Fire officials cited higher than normal line pressures just before the blast. The reformer was being brought back on line after being shutdown for several weeks for repairs. The ensuing fires were quickly contained and extinguished, but caused offsite traffic within several blocks to be stopped. As a precautionary measure, a second reformer unit was shutdown pending the investigation. A large number of injuries was due to the close proximity of a construction crew working in the area. Two were declared dead at the scene and a further two later in hospital.
Event Date
December 5, 1985
Record Quality Indicator
Classification of the Physical Effects
Nature of the Consequences
Causes
Cause Comments
The INITIATING CAUSE was the loss of confinement of a pipe carrying naphtha and hydrogen, probably due to internal pressure higher than the maximal allowed value. The ROOT CAUSE of the fire is unknown.
Facility Information
Application Type
Application
catalytic reforming process
Specific Application Supply Chain Stage
Components Involved
Hydrogen, naphtha feed pipe;
Storage/Process Medium
Location Type
Operational Condition
Pre-event Summary
The reformer was being brought back on line after being shutdown for several weeks for repairs. One of the source mentions that the reformer was used to add hydrogen to gasoline, to increase octane number.
Consequences
Number of Injured Persons
45
Number of Fatalities
3
Post-event Summary

Following the incident, it was expected that the plant would be returned to service within the month.

Event Nature
Emergency Action
The ensuing fires were quickly contained and extinguished, but caused offsite traffic within several blocks to be stopped.
Release Type
Release Substance
H2 100%
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

Los Angeles Times of 6 December 1985