European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre
Hydrogen explosion in a chemical processing plant (1004)
This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.
Hydrogen explosion in a chemical processing plant
The event occurred at manhole cover of a of a pilot plant reactor where hydrogenation had been performed in a hydrochloric aqueous solution. The reactor had been flushed three times with nitrogen (i. e. nitrogen injecting at 3. 2 bars and then relieving). An employee opened the manhole cover of the reactor to take a sample of the reagent. . After opening it, a minor detonation occurred. According to the DECHEMA database, the investigations found out these following causes: 1. The geometry of the reaction vessel was such that a hydrogen bubble remained in the area of the manhole despite three flushing operations with inert gas. 2. catalyst material was deposited in the area of the manhole. This probably occurred during insertion of platinum catalyst and/or during stirring. This material constituted an ignition source, once dried out. . 3. On opening the manhole cover, air was able to penetrate into the upper part of the reactor and created an explosive mixture with the remaining hydrogen. This mixture was then ignited by the baked-on catalyst.
The INITIATING cause was the introduction of air into the reactor which was sill containing hydrogen. The root cause is related to inadequate flushing and sampling procedures.
We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.
Contact info
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.