Skip to main content

Fire at a generator of a power plant (521)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Fire at a generator of a power plant

A technical failure in the High-Pressure turbine blades caused high vibrations in lubricating oil pipes. Some pipes broke off and the oil leak caught fire from hot surfaces. Also the generator's hydrogen leaked out and exploded. The fire caused the loss of control air and electrical power of several safety-related components: for instance, two turbo-blowers and main heat exchanges were inoperable The fire also affected a main circulation water pipe expansion joint causing outpouring of sea water which caused the flood of the lower levels of the turbine and reactor buildings
Event Date
October 19, 1989
Record Quality Indicator
Region / Country
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
The explosion was caused by turbine vibrations which led to rupture of a fastener beating of the turbine shaft.
Facility Information
Application Type
Application
Nuclear power plant
Specific Application Supply Chain Stage
Components Involved
generator, HP turbine, turbine blades, oil, hydrogen
Storage/Process Medium
Actual Pressure
0
Design Pressure
0
Location Type
Operational Condition
Pre-event Summary
A technical failure in the HP turbine blades caused high vibrations in lubricating oil pipes. Some pipes broke off and the oil leak caught fire from hot surfaces.
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Currency
Property Loss (onsite)

100000000

Post-event Summary

Fire damaged one of the 2 turbine generators. The turbine vibrations also led to rupture of a condenser intake pipe, with an ensuing flood that unlashed an estimated total of 4000 cubic meters of water in lower floors of the turbine and reactor buildings. The extent of the damage is estimated at $ 100 million.

Lessons Learned
Generic lesson learnt from major Nuclear Power Plants accidents can be found in IAEA, Experience gained from fires in nuclear power plants: , IAEA-TECDOC-1421 Available at https://www-pub. iaea. org/MTCD/publications/PDF/TE_1421_web. pdf
Event Nature
Emergency Action
It took 4 hours to bring the fire under control, When the fire was extinguished 2 of the 4 gas circulator systems and 2 of the 4 main heat exchanger systems were knocked out and 2 RHR systems in the reactor basements were disabled by flooding.
Release Type
Release Substance
H2, oil
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

IAEA, Experience gained from fires in nuclear power plants: Lessons learned, 2004, IAEA-TECDOC-1421 Available at https://www-pub. iaea. org/MTCD/publications/PDF/TE_1421_web. pdf (accessed July 2024)

WIKIPEDIA page dedicated to the accident https://en. wikipedia. org/wiki/Vandell%C3%B2s_I_nuclear_incident (accessed October 2025)

WISE International

This event is listed in From T. VIROLAINEN, J. MARTTILA, H. AULAMO, "TURRBINE GENERATORS AT VVER-440 NUCLEAR POWER PLANTS”, in "Upgrading of fire safety in nuclear power plants", IAEA-TECDOC-1014, Proceedings of an International Symposium, Vienna (Austria), 18-21 November 1997 https://www. iaea. org/publications/5310/upgrading-of-fire-safety-in-nuclear-power-plants (accessed July 2024)