Skip to main content

Fire in the a catalytic reforming unit of a refinery (839)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Fire in the a catalytic reforming unit of a refinery

A fire broke out at a flange inside a heat exchanger of the catalytic reforming unit of a refinery. This heat exchanger had the purpose to pre-heat the load of heavy oil and hydrogen by recovering the heat of the products coming from the reactors. No flame and smoke were visible from the outside. The unit was stopped, depressurised abd kep cooled with water. The fire was fought with foamand was brought under control two hours later. The amount of product burned is less than 1 t.
Event Date
June 15, 2005
Record Quality Indicator
Region / Country
Classification of the Physical Effects
Nature of the Consequences
Causes
Facility Information
Application Type
Application
catalytic reforming process
Specific Application Supply Chain Stage
Components Involved
flange of a heat exchanger, catalytic reforming unit
Storage/Process Medium
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Post-event Summary

The amount of product burned is less than 1 t.

Event Nature
Emergency Action
19:30 The fire broke out. The unit was shutdown and depressurised. Waiting for the complete depressurisation, staff cooled the equipment with water and created a foam pad. 20:30 Firefighters are alerted without a request for intervention. 22:30 Fire under control.
Release Type
Release Substance
H2, heavy oil
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

ARIA data base event no. 30221