Skip to main content

Explosion at the catalytic reformer unit of a refinery (620)

This data is from the European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre.

Explosion at the catalytic reformer unit of a refinery

A fire and explosion occurred at a catalytic reformer unit. The fire centred between the reactors and fired heaters of the reformer and resulted in extensive damage to the unit. The explosion rocked the nearby refinery control centre and broke windows half a mile away. There were no injuries. After the explosion, the operating crew isolated all hydrocarbon and utilities lines at the unit battery limit. The columns and vessels could not be pumped out due to total loss of power. A 750 gpm stationary monitor located north of the unit was directed on the affected pipeline to cool down and prevent further failures. The fire caused major damage to four reformer heaters, piping, wiring, instrumentation and structures in the area. After investigations into the cause of the incident it was found that metallurgical failure probably caused by hydrogen attack was to blame. Metallurgical analysis revealed that high temperature hydrogen attack occurred in various forms throughout the steel lines.
Event Date
November 14, 1974
Record Quality Indicator
Event Initiating System
Classification of the Physical Effects
Nature of the Consequences
Cause Comments
According to the ICHEME report (see references), the INITIATING cause was the localised failure of a pipe due high temperature hydrogen attack. Since the post-event metallurgical investigation identified the hydrogen attack in various forms throughout the steel pipelines, it can be assumed that the ROOT CAUSE was a wrong material choice.
Facility Information
Application Type
Application
catalytic reforming process
Specific Application Supply Chain Stage
Components Involved
reformer, reactors and reaction equipment
Storage/Process Medium
Location Type
Operational Condition
Consequences
Number of Injured Persons
0
Number of Fatalities
0
Post-event Summary

There were no injuries. The fire caused major damage to four reformer heaters, piping, wiring, instrumentation and structures in the area. The explosion rocked the nearby refinery control centre and broke windows half a mile away.

Lessons Learned
Since the year of the accident, technologies have made considerable progress in understanding the mechanisms underlying hydrogen damage, from embrittlement to high temperature attack. This assisted in developing and improving guidelines and procedures facilitating the choice of and design with the correct steel types in presence of (cold and hot) hydrogen.
Event Nature
Emergency Action
After the explosion, the operating crew isolated all hydrocarbon and utilities lines. Since the columns and vessels could not be pumped out due to total loss of power, they were cooled down prevent further failures.
Release Type
Release Substance
H2, hydrocarbons
Hydrogen Release Concentration (%)
0.00
Ignition Source
Detonation
No
Deflagration
No
High Pressure Explosion
No
High Voltage Explosion
No
References
References

Event description extracted from the UK database ICHEME in PDF ICHEME database is no longer available for purchase, but data can be download as PDF for free. https://www. icheme. org/knowledge/safety-centre/resources/accident-data/ (accessed October 2020)