Skip to main content

ISO 19880-5 Gaseous Hydrogen - Fueling Station – Part 5: Hoses

ISO 19880-5 Gaseous Hydrogen - Fueling Station – Part 5: Hoses

Application Type
Region/Organization
Scope

This document specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of −40 °C to 65 °C. This document contains safety requirements for material, design, manufacture and testing of gaseous hydrogen hose and hose assemblies for hydrogen fueling stations. Hoses and hose assemblies excluded from the scope of this document are the following: · 1) those used as part of a vehicle high pressure on-board fuel storage system, · 2) those used as part of a vehicle low pressure fuel delivery system, and · 3) flexible metal hoses.

Status Explanation

Originally published in 2019. The 2nd edition was published in July 2025.

Available at: www.iso.org

Adopted as a standard in South Korea and Australia.

For availability and current edition in South Korea, see: www.ksa.or.kr

For availability and current edition in Australia, see: www.standards.org.au or www.techstreet.com/

Committee Information

Convener: Karen Quackenbush