Skip to main content

GB/T 26466-2011 Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen

GB/T 26466-2011 Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen

Application Type
Region/Organization
Scope

This standard specifies the stationary high-pressure hydrogen storage container with steel wound wrong design, manufacture, inspection and acceptance requirements. This standard applies to both of the following conditions are stationary high-pressure hydrogen storage container with steel wound wrong: a) design pressure is greater than or equal to 10MPa and less than 100MPa, b) the design temperature is greater than or equal to -40��C and less than or equal to 80��C, c) is greater than or equal to the inside diameter of 300mm and less than or equal to 1500mm, the design pressure (MPa) and the inner diameter (mm) of the product is not above 75, 000

Status Explanation

See https://www.chinesestandard.net/Index.aspx for availability and current edition.