Skip to main content

Document library

PUBLICATION · White Paper

Safety Issues Associated with the Use of Alternative Fuel Tanks: What Can the Hydrogen Community Learn from the CNG Experience?

Natural gas was first used as a vehicle fuel as far back as the 1930s. The first natural gas vehicles, which ran on uncompressed natural gas, were called “gas bag” vehicles and were used to combat gasoline shortages during World War I [1]. During and after World War II, compressed natural gas (CNG) vehicles using fuel tanks mounted on the roof gained popularity in France and Italy [2]. Today, there are more than 24 million CNG vehicles in service worldwide, including CNG buses that continue the early tradition of mounting fuel tanks on the roof.  

PUBLICATION · White Paper

Qualified Individual for Liquid Hydrogen

The HSP has reviewed many safety plans for gaseous hydrogen. An emerging trend is the use of liquid (cryogenic) hydrogen in the commercial market, potentially near residential areas, for fueling hydrogen fuel cell vehicles. Finding a “qualified” person to determine liquid hydrogen code compliance is difficult, and the skills necessary of such an individual are not well defined in the codes and standards.

PUBLICATION · Technical Report

Analyses in Support of Risk-Informed Natural Gas Vehicle Maintenance Facility Codes and Standards: Phase II

Safety standards development for maintenance facilities of liquid and compressed natural gas fueled vehicles is required to ensure proper facility design and operating procedures. Standard development organizations are utilizing risk-informed concepts to develop natural gas vehicle (NGV) codes and standards so that maintenance facilities meet acceptable risk levels. The present report summarizes Phase II work for existing NGV repair facility code requirements and highlights inconsistencies that need quantitative analysis into their effectiveness.

PUBLICATION · Research Paper

Potential for Hydrogen DDT with Ambient Vaporizers

The ignition of a hydrogen-air mixture that has engulfed a typical set of ambient vaporizers (i.e., an array of finned tubes) may result in a deflagration-to-detonation transition (DDT). Simplified curve-based vapor cloud explosion (VCE) blast load prediction methods, such as the Baker-Strehlow-Tang (BST) method, would predict a DDT given that typical ambient vaporizers
would be rated as medium or high congestion and hydrogen is a high reactivity fuel (i.e., high laminar burning velocity).

PUBLICATION · Technical Report

Abusive Testing of Proton Exchange Membrane Hydrogen Fuel Cells

In collaboration with Parker Hannifin Corporation, the Fire Safety Branch of the FAA conducted testing to evaluate the effects of three potential failure conditions of hydrogen proton exchange (or polymer electrolyte) membrane fuel cell stacks supplied by Nuvera Fuel Cells. The three conditions examined were a loss of coolant to the stack, short circuit, and a crossflow condition.

PUBLICATION · Research Paper

Evaluation of flammability limits of H 2 /O 2 /N 2 mixtures in conditions relevant to nuclear waste transportation

The aim of the present work is to assess the risk of explosion in closed containments used for the transportation of nuclear materials or nuclear waste. Indeed, it is very well known that hydrogen can be produced due to (i) the radiolysis of different materials within the containment, (ii) the thermal decomposition of mainly the organic part in the containment. Since hydrogen has a very low ignition energy and a very wide flammability domain, it is important to determine the risk of ignition of the subsequent mixture produced by the aforementioned mechanisms.

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.