Skip to main content

Document library

PUBLICATION · Technical Report

HyRAM V2.0 User Guide

Hydrogen Risk Assessment Models (HyRAM) is a software toolkit that provides a basis for quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM integrates validated, analytical models of hydrogen behavior, statistics, and a standardized QRA approach to generate useful, repeatable data for the safety analysis of various hydrogen systems. HyRAM is a software developed by Sandia National Laboratories for the U.S. Department of Energy.

PUBLICATION · Technical Report

Identification of Hydrogen Material Risk Research Areas

This report presents a research framework for the application of quantitative risk assessment to hydrogen materials, based on the identification of potential areas of research, a literature review, and a plan for future work in the area of hydrogen materials risk. After outlining basics on hydrogen infrastructure, with a focus on pressure vessels, a number of materials risk topics are identified and discussed. Of these, four important areas of risk application to hydrogen materials are highlighted and discussed in further detail.

PUBLICATION · White Paper

Secondary Protection for 70 MPa Fueling 

In developing a 70 megapascal (MPa) fueling infrastructure, it is critical to ensure that a vehicle equipped with a lower service pressure fuel tank is never filled from a 70 MPa fueling source. Filling of a lower service pressure vehicle at a 70 MPa fueling source is likely to result in a catastrophic event with severe injuries or fatalities. The Hydrogen Safety Panel recommends that DOE undertake a two‐step process to address this issue.

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.