PUBLICATION · Progress Report
2015 Annual Progress Report
VIII.6 Hydrogen Safety Panel, Safety Knowledge Tools and First Responder Training Resources
PUBLICATION · Progress Report
VIII.6 Hydrogen Safety Panel, Safety Knowledge Tools and First Responder Training Resources
PUBLICATION · Presentation
PUBLICATION ·
The purpose of this guide is to provide basic background information on hydrogen technologies.
It is not intended to be a comprehensive collection of hydrogen technologies safety information.
PUBLICATION · Technical Report
The Hydrogen Safety Panel brings a broad cross-section of expertise from the industrial, government, and academic sectors to help advise the U.S. Department of Energy’s (DOE) Fuel Cell Technologies Office through its work in hydrogen safety, codes, and standards. The Panel’s initiatives in reviewing safety plans, conducting safety evaluations, identifying safety-related technical data gaps, and supporting safety knowledge tools and databases cover the gamut from research and development to demonstration and deployment.
PUBLICATION · Progress Report
VIII.9 Hydrogen Safety Panel and Hydrogen Safety Knowledge Tools
MEDIA · Video
Hydrogen liquid and gas properties and risks.
PUBLICATION · Conference Paper
Solid particle heat transfer and storage media have been shown to be able to operate at temperatures >1000 °C in concentrated solar power (CSP) applications, much higher than the operational limit of 600 °C for current state-of-the-art molten nitrate salt heat transfer fluid. Solid particles can be endothermically reduced by direct exposure to concentrated solar energy, thus absorbing and storing thermal energy beyond that possible with sensible heating alone.
PUBLICATION · Research Paper
Large-scale deflagration and detonation experiments of hydrogen and air mixtures provide fundamental data needed to address accident scenarios and to help in the evaluation and validation of numerical models such as the AutoReaGas code (used by Mitsubishi Heavy Industries, Ltd). Several different experiments of this type were performed. Measurements included flame-front time of arrival (TOA) using ionization probes, blast pressure, heat flux, high-speed video, standard video, and infrared video.
PUBLICATION · Technical Report
Sodium chloride and four or five other particulate materials have been used successfully as fire suppression agents for specific combustible metal fires. The certification testing and National Fire Protection Association recommendations for using these suppression agents are summarized here. The sodium chloride based agent and ordinary sand have also been used in some sodium hydride fires, and in a sodium hydride fire test series.
We are the leaders in the building industries and factories. We're word wide. We never give up on the challenges.