Skip to main content

Document library

PUBLICATION · Technical Report

HyRAM V2.0 User Guide

Hydrogen Risk Assessment Models (HyRAM) is a software toolkit that provides a basis for quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM integrates validated, analytical models of hydrogen behavior, statistics, and a standardized QRA approach to generate useful, repeatable data for the safety analysis of various hydrogen systems. HyRAM is a software developed by Sandia National Laboratories for the U.S. Department of Energy.

PUBLICATION · Technical Report

Identification of Hydrogen Material Risk Research Areas

This report presents a research framework for the application of quantitative risk assessment to hydrogen materials, based on the identification of potential areas of research, a literature review, and a plan for future work in the area of hydrogen materials risk. After outlining basics on hydrogen infrastructure, with a focus on pressure vessels, a number of materials risk topics are identified and discussed. Of these, four important areas of risk application to hydrogen materials are highlighted and discussed in further detail.

PUBLICATION · Research Paper

Fire Safety of Hydrogen Leaks

Quenching limits of hydrogen diffusion flames on small burners were observed. Four burner types,
with diameters as small as 8 m, were considered: pinhole burners, curved-wall pinhole burners, tube
burners, and leaky fittings. In terms of mass flow rate, hydrogen had a lower quenching limit and a higher
blowoff limit than either methane or propane. Hydrogen flames at their quenching limits were the weakest

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.