Skip to main content

Document library

PUBLICATION · Technical Report

Safety of Hydrogen Systems Installed in Outdoor Enclosures

The Hydrogen Safety Panel brings a broad cross-section of expertise from the industrial, government, and academic sectors to help advise the U.S. Department of Energy’s (DOE) Fuel Cell Technologies Office through its work in hydrogen safety, codes, and standards.  The Panel’s initiatives in reviewing safety plans, conducting safety evaluations, identifying safety-related technical data gaps, and supporting safety knowledge tools and databases cover the gamut from research and development to demonstration and deployment.

PUBLICATION · Conference Paper

Thermochemical cycle of a mixed metal oxide for augmentation of thermal energy storage in solid particles

Solid particle heat transfer and storage media have been shown to be able to operate at temperatures >1000 °C in concentrated solar power (CSP) applications, much higher than the operational limit of 600 °C for current state-of-the-art molten nitrate salt heat transfer fluid. Solid particles can be endothermically reduced by direct exposure to concentrated solar energy, thus absorbing and storing thermal energy beyond that possible with sensible heating alone.

PUBLICATION · Technical Report

Safety Standard for Hydrogen and Hydrogen Systems

This document and its companion document, Safety Standard for Oxygen and Oxygen Systems (NSS1740.151996),are identified as Tier 2 Standards and Technical Requirements in the NASA Safety and Documentation Tree (NHB 1700.1 1993). The information presented is intended as a reference to hydrogen design and practice and not as an authorizing document. The words "shall" and "must" are used in this document to indicate a mandatory requirement, and the authority for the requirement is given.

Disclaimer- The documents and references herein are for information purposes only and should not be construed as endorsement by the Hydrogen Safety Panel.